2405SW MTNLUVE (Arctic Cat All models)
IMPORTANT: 
Simulation displayed! Your model may not be exactly represented in the above picture. We’ll send you a custom mockup for approval before we print and send your customization so the Order will fit on your model!
IMPORTANT: Your model may not be exactly represented in the picture above. We will send you a personalized mock-up for approval before printing and sending your customization.
STARTING FROM
Got a question or having problems?
Are you drawn to tribal elements and feel the call of the mountain? Be part of the rider tribe by customizing this design with 5 colors that characterize you.
Step 1
Select the design with preset variations.
Step 2
Select a color from the range offered, along with any other available graphics.
Step 3
Select coating or material finishing options
Step 4
Add to cart and check order details.
Step 5
Installation – Get ready for fun!
FREQUENTLY ASKED QUESTIONS
Categories
Didn’t find what you were looking for? Contact us on +40 728 247 606 or by e-mail at hi@digitalsteez.eu!
A full kit “dresses” all or as much of your car as possible. A partial one may consist of specific items such as:
Motocross: front number plate and exhaust fairings
Snowmobiles: plastic hulls only, or just the chassis/tunnel element.
These will be consulted with our designers to decide on a specific cost and delivery time, as they require differential processing.
Yes! You can upload files when you place your order or send them by e-mail. Please note that we can only use .ai, .eps or .pdf files.
If by mistake, or for other reasons you don’t have the above formats, we will have to charge a fee of 200 ron for the adaptation and vectorization of each element that makes up a photo, only on the condition that the photo has a minimum of 1024×1024 pixels.
There are a few brand logos such as (RedBull, Monster Energy, GoPro, KTM) that cannot be used due to strict licensing laws but we will provide alternatives for these.
Our materials vary between 250 and 1000 microns, depending on the lamination and the product category chosen (LOWCOST or PREMIUM), the thinnest being LOWCOST GLOSS and the thickest being PREMIUM TRACTION.
Yes! Your design will be “SOLD” with a PROOF and and emailed to you in as short a time as possible. Usually takes 3 – 7 business days. Shipping and production times may be increased during peak times throughout the year.
NOTE: Nothing will be printed without your approval even if you did not have any form of customization placing your order. For more detailed information, please visit the Production and Delivery page
To modify your order, please contact us immediately after placing your order (24h maximum). If production has already started, we will not be able to change it.
Data security is of enormous importance to us and we take vital steps to protect our customers’ information. We use encryption technology to ensure the secure transmission of any personal information you provide while using our website.
All transactions on our website are conducted using Secure Sockets Layer (SSL) encryption provided by Braintree. You can easily see when you are sending data securely by checking the web address (URL) in your browser window: the first few letters will change from “http” to “https” when you are sending SSL encrypted information (“s” in “https” stands for “secure”).
DIGITALSTEEZ has a trust mark – the green bar – indicating a more secure website. This indicates that the site is SSL certified so it is a secure platform.
We accept Visa, MasterCard, Maestro, Apple Pay, PayPal, Bank Transfer, installments at Banca Transilvania, installments at Klarna, etc.
Anywhere in Romania and Europe, standard or express
It can’t for 2 reasons:
1: The production technique requires that the materials are allowed 24 hours to dry and adhere well. If we do not do this, you risk receiving a set of stickers prone to a shorter lifespan.
2: The order (We treat each order in turn, not several at once, which is why it is almost impossible to commit to a same-day delivery)
Want to represent us? Send us your CV >>> Your best race/freestyle photos or video, and tell us how you’ll make it worth our time to send you free stuff – get creative – you’ll fly our logo on your car. Tell us your unique plan to expose customers to the coolest concept in cosmetic stimulation!
We also offer gift vouchers (TBC)
Yes! Our weekly email subscribers receive a 15% discount on their first order and we occasionally offer limited-time promotions. Click here to subscribe to our weekly email ….
Yes, we sell personalized t-shirts with embroidery or DTF.
Yes, we sell Trucker caps with embroidery personalization.
Yes, we sell customized motocross saddles
Yes, we have a few selected products/accessories but no catalog as such. We have 3D printing and 3D scanning technological methods at our disposal, therefore we can make low to medium resistance plastic and rubberized parts.
We also have partnerships with turners and painters, so do not hesitate to ask us a question for other components made of metal structures or alloys: e.g. hubs, sleeves, wheels
No. These can only be ordered separately as an additional item in your order.
Our business model is based on top quality graphics, materials and customer support, as well as a set of USP’s such as our Website with customizer included!
We offer a fitting service on request. The service may include new plastics but at the base it confers graphics and mounting. For plastics with graphics installed, additional shipping charges will apply. For more information please inquire at suport@wraps.digitalsteez.eu
Each set is contour-cut and is accompanied by an installation guide (for more complex machines such as Sxs or Snowmobiles, jetskis, or ATVs. We know that the anxiety about the risk of ruining a set of stickers worth several hundred Euros can be high, so we provide you with all the information you need to install.
Before you begin to install your new graphics kit, the plastics for must be in reasonable condition. The plastics should be warm before applying the stickers. We recommend storing the plastics in a room above 18°C for a few hours.
Wash your hands. It is very important to have clean hands while preparing the surface and working with the stickers. Oily / dirty hands will reduce the ability of the stickers to adhere. A detailed STEP BY STEP video can be found here. Take your time and be patient! Detailed Installation
First, you need to remove the old graphics. The best way to do this properly is to use heat gun to heat the old stickers for easy removal. After that, you’ll need 97%+ purity technical alcohol containing degreasing agent (avoid the greasy ones) and disposable wipes to clean off all the adhesive residue.
You can use 3M™ Adhesive Remover Citrus Base which works perfectly to dissolve and remove the adhesive residue left by the old kit. Alternatively, you can use other similar products.
The best way to avoid bubbles under graphics is to use media with FLO technology which eliminates bubbles and dramatically reduces installation time. FLO technology stands for microscopic air channels in the adhesive layer of the stickers. All our customized stickers are made using bubble-free technology.
In case you still find some bubbles under the freshly installed kit – no worries – it can be solved in a few simple steps. For the best result you will need a heat gun or hairdryer and needle or a razor blade.
1. Heat the bubble (don’t burn it or overheat it). As it heats the air inside the bubble, it will expand – perfectly
2. When the sticker is heated, grasp the needle or razor blade and poke a small hole in the bubble so that air can seep out and the sticker can sit back on the plastic, pressing gently with a clean finger.
3. Use your fingers to push the remaining air out and press the vinyl down. Do not use sharp or very rigid objects in this process as you risk damaging the material!
Yes, it is possible, with a special quote from us, after contacting us at suport@wraps.digitalsteez.eu The delivery time can take between 2 working days (URGENT, with urgency fee) or 14 working days (STANDARD, without urgency fee, only by paying the counter-value of the respective parts)
Under the terms described in the Post Order Terms and Conditions there is warranty only under certain isolated conditions. Otherwise, we are not responsible for defective deliveries, faulty installations and any other incorrect operations that have occurred after the order has been approved and launched.
Our products are made using only the highest quality materials produced by Substance Incorporated. Stickers are tested daily by riders around the world. No manufacturer of POWERSPORTS graphics and stickers can predict the life of the stickers as it depends on:
- Mechanical wear, shocks and knocks.
- travel style and frequency,
- Temperature progression in your environment (Transitions from hot to cold and vice versa).
- As with any stickers, it is extremely important to prepare the plastics properly before the installation process.
- External factors and harmful chemicals
You can find more details on the Product Returns page
Unfortunately we cannot accept the product. We are profiled on PRINT-ON-DEMAND and in order to receive the product back, the only possible situation is a strong justification regarding a potential product defect under the possible conditions described in the Order Agreement form, signed at the launch of the order. By the way, everything related to potential color-related defects has been explained in the Color Guide
Newsletter
Useful Links
Useful Links
Prețuri în curs de actualizare!
Pentru prețurile exacte, cotactați-ne la: